Tips for Glazing a Window
To seal your windows properly so that there is no unwanted water and air, glazing ought to be replaced after a certain period. Glazing requires some time and skills but you can as well do it on your own by applying the below guidelines.
Make sure you get all you need. You need to ensure you have all the supplies you will need to glaze your window. The things that will help you glaze a window correctly include putty, a putty knife, clean rags, sandpaper, paintbrushes, paint, adhesive tape, and more. Chances are, most of these items are in your house or garage but if you do not have them, they are available at your local hardware.
Ensure the glass and old putty are removed. You need to tape a newspaper to the two sides of the window pane. Secondly, use a hammer to destroy the glass then pull it out of the pane. Next, loosen up the putty using the putty knife. If the putty does not easily come out when one is using a knife; they should consider melting it using the blow torch. Disconnect the metal fasteners from the frames.
Ensure you make the wood smooth. You should use the sandpaper to make the wood smooth. After the wood has been made smooth, treat it using the oil-based primer after which it should be sealed. It is important o apply primer because it hinders oil absorption that can result in cracks on the glazing after a short time, meaning more drafts. The primer ought to be left for 24 hours so that it dries.
You should mix the putty thoroughly. After the putty is kneaded till soft put it along the inside of the panes then press it using your fingers. Using the putty knife, press it as tight as you can. After placing the putty, fit the new pane.
Ensure you apply new glazing. At the window panes center, place glazier points and use the putty knife to press the point in its place. Make sure glazier points are put on every side of the window pane then put new glazing around the window frame. Put pressure so that the glazing can hold the glass pane securely. Trim out the excess putty.
You should let the glazing dry and paint it. You should leave the glazing for about 10 days for it to dry. You may be irritated with fingerprints being on the glass but do not clean it until it is dry. With the use of the oil-based primer and paint, clean up the window while ensuring it matches with the other windows of your house.
Researched here: read this